UPVC Window Handle Replacement

It is easy to repair a broken window handle with the right tools. It is essential to know the type of handle you have as well as the size of its spindle before purchasing the replacement.

Older uPVC windows feature handles with cockspurs, which have an extension spur that can secure a wedge-shaped cockspur striker plate. These can be either left or right-handed and need to match when replacing.

What kind of lock or handle do I have

There are many kinds of upvc window handles and locks, each with its particular advantages and uses. The type of handle you choose will determine if the locking mechanism you have is effective and also if it is simple to open the windows. With time and regular use the upvc handles that are on your windows could get worn out and damaged. This makes them less secure and less effective. In some instances, they could even fall completely off. If you find that your double glazing window replacement handles have been removed, it's crucial to repair them as quickly as possible. This will help stop potential burglaries and keep your home safe.

Luckily, replacing your window handles made of upvc is a fairly simple job that can be completed by anyone. You will need some basic tools, but with proper knowledge, it's simple and should only take a few minutes. It is important to know the kind of handle or lock that you have on your window. This will allow you to choose the appropriate replacement.

Inline Espagnolette Handles

They are usually found on the sides of the window. They are flat and have a latch which engages the locking mechanism of the window frame. Inline upvc handles come with a spindle running through the middle of the handle to the window frame in order to operate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and feature a distinctive, hook-shaped design. Cockspur handles are attached to the frame of the window by one screw, and are less secure than other kinds of window handle.

Tilt and Turn Handles

The tilt and turn handles are different from other upvc handles in that they can be turned to open the window and then lowered into the window to ventilate. They typically feature a 7mm spindle on the back of the handle and are available in both left and right handed versions.

When buying replacement upvc handles It is crucial to check the spindle length because not all handles are the same size. To determine the length of your upvc handle, simply drop something into the middle of the hole and measure the distance it travels before it reaches an obstruction. This is the length of the spindle that will fit your window.

What is a spindle?

uPVC window handles operate in a similar way like doors. By turning the handle, you can operate a latch within the frame. The latch opens the window, to allow it to be closed and opened. However, in some cases, handles can be damaged, particularly when they are used frequently or exposed to harsh weather conditions. You may have to replace the handles on your uPVC window if they're not operating correctly.

There are many types of uPVC handles, including Espag, Cockspur, window glass replacement and Spaded handles. They are designed in a variety of ways to fit into uPVC frames. Each handle style uses a different spindle to lock the window mechanism. It is important to identify the type of handle you have installed on your uPVC windows so that you can replace it with the correct one.

The base of the handle will tell you what type of uPVC it is. A snap-in cover is over the screw that holds the handle's base in place. Once you remove this and you'll be able to see the second screw that holds the handle base in position. Once both screws have been removed and you are able to remove the handle from the uPVC.

After you have removed the uPVC handle, carefully remove it from the locking mechanism. Make note of the length of the spindle as you will need to ensure that you buy one that is the same length as the original handle and locking mechanism.

The spindle wears out and cannot operate the locking mechanism. This can be caused by corrosion, damage from continuous use, or even an unreliable locking mechanism. If this happens, you will need to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove the handle that was previously attached?

Over time and through everyday usage, window handles could become damaged or broken and if this happens it is essential to fix them as quickly as possible to ensure the security of your home. It is simple to replace a worn or damaged handle. The job can be completed in under one minute without the need for any special tools.

To remove the handle, you must first remove the screw located at the base of the handle. Once the screw has been removed, the handle will be removed. There will be a second screw that is located at the bottom of the handle base, and it is able to be removed as well. After both screws are removed the handle can be completely detached from the base of the window.

After removing the handle and fixing holes, align the holes of the new handle with the holes already present in the window frame. There may be a tiny cap or sticker on the new handle, so take off these if necessary and then screw the handle in its place. Once the handle is in place it is important to test that it is working by turning the handle and ensuring that the lock mechanism is activated.

Espag handles come with an extra spindle that is protruding from the handle and slots into a multipoint locking mechanism in the frame of the window. Cadenza windows feature a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that hooks over either the outer frame or the transom bar cross member in the window.

Once you have the new handle in place, insert the spindle into the lock in the window and then tighten it down. Once the handle is securely fixated, replace the'snap in' cover and screw cap (if applicable). The handle is now ready to use by opening and closing the window several times to check that it is working properly and securely.

How do I install the new handle?

It's not difficult to alter the handle on your windows made of uPVC. The procedure is easy. You'll need an screwdriver and a bit of perseverance. First, make sure the handle is not locked. Then remove any screws visible. You can also replace them with screw caps. After you have removed the handle, you'll need to take note of the length of the spindle which extends from the back. This is vital as it will determine what kind of handle to purchase.

Espagnolette handles on uPVC are the most well-known type of handle. They have a spindle which runs through the handle and acts as a locking mechanism inside the frame of the window. When the handle is turned it releases the latch on the window, allowing it to open. Over time and through regular use, espagnolette handles may become damaged or impaired, making it necessary to find an alternative.

Cadenza handles are a kind of uPVC handle that is usually employed with tilt and turn windows. They feature an elongated blade that functions as an interlocking mechanism that is multipoint within the window. They are usually more secure than espagnolette handles since they can only be opened from the inside. They can be replaced with the same method as espagnolette handles however you should ensure that the new handle has an angled blade as opposed to flat ones.

Once you have selected the right handle, simply align the new handle with existing screw holes before screwing it in place. Then, put the screw covers back on and test that your new handle is operating properly. You can accomplish this by dragging the handle between the locked position to the unlocked a few time. If you have any issues, it may be worth contacting a specialist to see if they can assist in resolving the issue. They are often able to advise you on the best approach to solve the issue in a fast and effective manner.