Choosing uPVC Replacement Window Handles

Most customers agree that these upvc replacement window handles are simple to install and feel like good quality. It's important to know that the handle you select for your window must be suitable for the window.

The key factor is the step height that refers to the gap beneath the handle's nose to the frame or base. Other considerations include lockable styles and mechanisms.

Replacement parts

You can purchase a range of replacement handles made of upvc. There are numerous styles and colors to choose from, and you're certain to find something that is compatible with your windows. It's easy to impulse buy especially if the handle fails, therefore it's a good idea to take your time and check the details prior to committing to buying a replacement windows (https://www.repairmywindowsanddoors.Co.uk/). First, you must know what type of upvc handles you have and what the differences between them. The table below lists the most commonly used handles so that you can choose the one that will match your window.

The majority of double-glazed windows today have epag handles. They are usually attached to the frame by two screws that are screwed in from both above and below.

They have a spindle bar on the back which can come in a variety of sizes and this will determine how they work (either left or right handed). This is why it's important to take a measurement of the handle you have to ensure you're ordering the correct replacement.

Usually fixed with two bolts much like the Espag handle, they are positioned low from the frame, which means that the handle will not poke through your blinds. This is a great option for blinds on your upvc windows and you want to make sure the handle will blend in with the blinds.

Cockspur handles resemble Espag handles, however they have a nose which closes over a wedge which rests on the frame of the window. This kind of handle can be found on older wooden and upvc windows.

On casement windows the tilt and turn handles can be operated by either turning the handle or pressing on the top of the window. The window is opened from the inside and lets you to clean outside without needing to step to the ladder or climb over the garden fence. They also make a great alternative for those with limited mobility and can be an excellent method to improve security and accessibility in the home.

Tips and tricks

There are a variety of different types of uPVC window handles, and lots of people will need to replace them at some time. It's important to have some tips and tricks that can help you make the task easier.

Examine the type of handle that is in your home. Depending on what the handle is attached to and what locking mechanism it is using it could be necessary to change the entire handle and lock. If the roller cams or shoot bolts (espags) are stuck or are getting stuck, you'll need to replace them as well as the handle.

Fortunately, the majority of uPVC handles follow industry standards and are alike. This makes replacing them a relatively simple process. First, remove the screws that cover the handles. They are typically pozidrive screws. Once they are removed, you can then take the handle apart.

It's a good idea to take note of how far the spindle extends from the base of the handle after you take it off it. This will allow you to determine the length of the spindle for a replacement handle. To do this, take a measurement of the square peg sticking out from the bottom of the handle and use it as a guide.

This is particularly important for inline uPVC window handles since they will always be straight and can only open either left or right, and will not operate in the middle. If you're unsure of the kind of handle you have at home, it can be an excellent idea to borrow an existing handle from your neighbour's home and observe how it functions to get an idea.

You can also determine the handiness of a uPVC window by watching the way the handle turns when it is in use. Handles that are hand-operated will turn clockwise or counter-clockwise. If you're not sure, you can always ask someone else to open the window with the handle, and work out how it works in this way.

Find the spindle's measurement.

It can be difficult to pick the appropriate replacement handle for your window since not all handles have the same size. The spindle is what is the mechanism that locks the window. It is important that when fitting a new handle it is measured to the spindle length accurately to ensure it fits. There are many different types of uPVC handles that operate in various ways. It is important to know which type you have, as well as the locking system you have.

The spindle on the espag handle extends from the handle's rear, and is connected to the lock gearbox inside the window frame. When you turn the handle, it will turn the lock inside the gearbox, allowing you to open the window. They are typically used on uPVC windows with casement and can be locked with keys to provide additional security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have an "nose", which is secured by a wedge-shaped striker block. They are also relatively simple and they can be locked using keys. These handles are somewhat more difficult to locate replacements for because they are not as common as the espagnolette handle.

If you have a tilt and turn uPVC then you'll require a replacement handle with a different locking system. The handle will tilt the window and allow it to rotate back and forth to fully open it. You should select the handle with a spindle that is at least 55mm in order to be able reach the window sash replacement frame.

You can follow the same procedure to remove and replace this kind of uPVC handle, however you must be cautious when removing the old one. It may be necessary to open the window wider than usual to reach both screws that attach it to the frame. After you have installed your new uPVC handle and checked that it is in the correct position, you are able to tighten the screws, and test the lock to make sure it functions correctly.

Fit the new handle

If you have the proper replacement handle, it should be easy to screw it into the correct position. This requires a screwdriver but might be easier using an electric one. When screwing, it is important not to over tighten the screws as this can cause the handle to crack or warp.

Another important step to take when installing the new handle is to put in the spindle. The spindle is the part that is inserted into the handle and operates the locking mechanism of the window. It is essential that it is installed correctly since it will ensure that the window can be closed and opened with confidence.

There are a variety of types of uPVC handles. These include:

Espagnolette Handles are handles inline that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are like inline handles but have a curved shape which is ideal for hard-to reach windows.

Tilt and Turn Handles These are used on tilt and turn windows for operating the opening and closing mechanisms.

The majority of uPVC window frames are equipped with these. In the UK they are often known as "Bay Windows".

If your uPVC window handle is broken it can be very frustrating. However, there is no need to replace the entire uPVC windows because of a damaged handle. There are a number of easy steps that can be taken to repair and replace a broken uPVC window handle.

You can fix your broken window handle quickly by identifying the type and determining the spindle. It is important to be patient and ensure security when working with windows or tools, however, this is a straightforward task. It can be the difference between having a safe and secure home, or an insecure, easily opened window! If you have any questions or would like to speak to a professional about replacing your window handle, contact Bridgewater Glass. We have a team that is skilled and replacement windows knowledgeable to help you with any issue.