Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is important to make sure that your windows are in good shape.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. However, if you have double-pane windows that are secured by internal beading it will be more difficult to remove the old panes and UPVC Window Repairs put in new ones. In this situation you'll need source some plastic spacers to help the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your home until a professional is able to fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. In time, they could be affected by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, uPVC window repairs which causes their tightness to decrease. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles can also become loose. This is usually due to screws that have been removed over time, but it could be due to the mechanism of the handle wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to shut the window and perform a test fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking used previously may require removal before a new layer of caulk is applied. It is crucial to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens in the breeze. These are easily replaced by any competent DIYer and can be done within a few minutes.

Like any mechanical component hinges will be damaged over time. It's very simple to replace a hinge on a window, but it's easier if someone helps you hold the frame.

Make sure that the uPVC hinges open and close in the proper direction. You can check this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

Faulty window doctor near me hinges could be the result of incorrectly opening the window in a particular way or due to poor installation at the factory. This can often be resolved by sending us a photo on our website. We will be pleased to offer you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also lower the risk of a window getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also be unbalanced due to wear, causing gaps where the sash and frame meet. These can be easily repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it may be possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be more cost-effective to replace them instead of fixing them. If you have any problems with your Upvc window you should consult an expert immediately.