Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. However when you have Double Glazing Repair Farnborough-pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass so that any shards fall onto the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is large, you might be interested in a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sagging. A window that is sagging can cause problems with light, draughts or even security. It is crucial to act when you discover that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll have to open the window so that you can get to the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, Double Glazing Repair Farnborough close the window and check for an appropriate fit. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you are unable to move the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can be due to the mechanism of the handle getting worn out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and then perform an experiment fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is important to act if you wake up every morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how severe the problem is, the old caulking might need to be removed. When it is time to uPVC repair, it is important to avoid over-caulking. This will make your window more difficult to clean and decrease its energy efficiency.

Verify that the drainage holes have no debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double glazing Dunstable-glazed window, it is more likely the issue is related to the seal, not the frame. Again this can easily be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens with an ease. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is very easy to change the hinges on a window but it's much simpler if you have someone to help you to hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to offer advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also because of wear and tear, can become misaligned, this will cause an opening to appear where the sash joins the frame. If they are beyond repair, it may be necessary to get them re-aligned. Second, the interlock can also become misaligned. This is located on the hinge's side and double glazing repair Farnborough could require to be cleaned. In certain instances it is possible to replace the hinges.

The seals may wear out or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will help block out cold air and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognize that all windows have a life span and eventually, they will reach the point when it's more economical to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional immediately.