Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need find some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

If you're planning attempt to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and repair the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap between the window and the door is significant, you may want to use an alarm system that has windows. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. As time passes, they may develop a number of problems, including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll have to open the window to get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window doctor near me to test the fit after you've relocated your hinges. If you're happy with the fit, you can tighten the screws until they stay in position.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles could also loosen. Often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and do an experiment fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how severe the issue is, old caulking might need to be removed. When it is time to uPVC repair, it is important to be careful not to over-caulk. This will only make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with ease, it may be hinges at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side-hung Upvc Repairs near Me windows that have hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is essentially a very simple process, Upvc Repairs near Me but it's easier when you have a person to help hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should open.

Faulty window hinges can be caused by incorrectly opening the window a certain way or due to improper installation in the factory. Sending us a photo through our website can often resolve the problem. We are always happy to offer assistance.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges because of wear and tear, could become misaligned. This will cause a gap to form where the sash meets the frame. They can be fixed by giving them a good clean, but if they are beyond repair it might be necessary to get them aligned or replaced. Second, the interlock can be unbalanced. This happens on the hinge's side, and could require to be cleaned. In some cases it might be necessary to replace the hinges.

The next most common reason for draughts is window seals. They can become worn down or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and will lessen the possibility of draughts.

One of the most effective ways to reduce drafts is to use an draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be put on the windowsill on top. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repair your windows made of upvc will continue to provide excellent security and insulation for your home. It is important to remember that all windows eventually wear out and it may be cheaper to replace them than to repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional as soon as you can.