Window Repairs

Window repairs can help homeowners save money and ensure their comfort. In the event of serious damages, like broken glass or a shattered frame, a replacement window may be required.

However, many other issues can be fixed to prolong the lifespan of your windows. The most frequent issues are:

Cracked or broken panes

Glass that is cracked could be caused by a lawnmowers that throws errant rocks or by the blow of a tree branch by strong winds. It's not just visually terrible, but it could cause more energy costs because the broken pieces allow cold air into your home. It's relatively easy to repair windows that have broken panes.

Begin by carefully removing the glass using gloves and glasses. You may have to use a utility knife to loosen old glazing compound or putty around the frame's edges. Next, use a soft paper towel or cloth to clean the glass's surface and the wood of the frame.

After cleaning the area, apply a silicone caulking that is waterproof to the frame's edges. This will stop water from leaking into the frame through the cracks and causing further damage.

A bad crack in double glazing repair Dunstable double glazing repairs Maldon repairs Wythenshawe (www.repairmywindowsanddoors.co.uk)-paned glass could compromise the gas between the panes, making your windows less insulative. If the crack is significant enough to threaten the quality of the glass or the glass has an inner pane completely missing, it's time to contact an expert.

Thermal stress cracks may also occur when there's a drastic difference in temperature both inside and outside your home. This causes the glass to expand and contract. If the cracks are located on two sides of a glass, it is recommended to replace it instead of try to repair it.

Clear tape can be used to close cracks in windows that are not yet ready to be replaced. It can also keep out cold winds and bugs. You can also cut an amount of nylon stocking big enough to cover the entire crack and glue it with duct tape. It's not an indefinite solution, but it's a good way to keep insects and cold air away from your home. If your windows are old and you're starting to notice cracks in the glass, it's a good idea to check with your local window manufacturer to determine if replacing the entire window could be a better alternative for you.

Rotten Wood

Wood rot is a typical problem for windows. It can damage a home's appearance and create a security risk. However, it is possible to repair rotted wood. You will first need to address the cause of the wood rot. Examine for leaks in the roof and other areas where water can enter the wood.

The next step is to take out any rotten parts of the window frame. This can be accomplished with an axe, a claw hammer, or rasp. Once the rotten areas have been eliminated then you must replace them with new wood. Pre-treated wood is suggested for this task, since it is resistant to rot. If you are unable to replace the damaged timber, you can use filler and wood hardener to repair the damaged area. This kind of product can be available at most hardware stores. To achieve the best results, double glazing repairs Wythenshawe follow the instructions on the label.

After you have repaired the rotten areas of the windowsill, it's important to protect the repaired area. This can be done by applying a water-resistant wood sealant. Sikkens, for example is a great one to apply.

You can also apply an epoxy filler with two parts to shield the wood from further damage. This product is easy to apply and leaves a nice finish. It is important to follow the directions on the label. When the epoxy filler is dry you can sand the surface of the wooden. Start with a rough sandpaper, then move on to a smoother grade.

You do not want to expose the damaged area to more moisture. It is a good idea therefore, to cover the surface repaired with an oil-based primer that will protect it from water. Then, you can apply the waterproof wood sealant.

The Won't open

There are many reasons windows don't open. Wood frames can warp when exposed to humid weather, the house may have settled or someone could have nailed it shut for security reasons. But with some patience and the right tools, most windows that are locked can be opened.

The accumulation of gunk or debris could be the main cause of a window not opening. Acme Glass notes that dirt and grime build up over time on sliding tracks, hinges and locks. Additionally, hardware made of metal is prone to rust when it comes into contact with humidity or direct sunlight. Spray grease on these areas to help to prevent oxidation and ensure that your windows are operating correctly.

The pulleys that raise or lower the window can become loose, or break. These parts can lose their tension and become obstructed, especially when the window is situated at least two stories above the ground.

If you're having trouble opening windows Try using a pry bar to gently push the window to open just a little at a time. Place a block of wood on the frame to give your pry bar more leverage, and be sure not to harm the window or the wood. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.

Another issue with windows that don't open is a broken spring that stops the window jamb from lowering or rising. You'll need to refer to the owner's manual for additional information depending on who made your windows.

If you've tried cleaning and lubricating the moving parts on your windows, but they still aren't opening, it's time to replace windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let your windows go from functional to unusable since a window that isn't properly closed can leave your home vulnerable to water damage and burglary. Contact our team for more information on our replacement windows and services today!