Double Glazing Lock Repairs

The best locks for your doors and windows will help prevent burglars from entering your home. In general, they don't enjoy breaking glass or slipping through windows that are not closed.

However, some double glazing owners have experienced problems with their door or window lock after it was installed. Fortunately, these issues are often fixable without having to pay for new double glazing.

Broken or faulty locks

A locksmith can fix your uPVC window or door lock if damaged or is not working properly. They can fix hinges, striker plate and locks for double-glazing. They can also adjust the cylinder to fix any misalignment which could cause your handle to operate correctly.

If the key fits inside the lock, but it doesn't turn or is difficult to insert the mechanism could be seized up. This can be due to dirt or grime accumulating inside the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. It is important to make use of a dry lubricant such as graphite or teflon instead of oil, which attracts dirt and stick to the inside of the mechanism. After you have lubricated the lock, you should insert the key and try to turn it. The lubricant must get into the mechanism and the lock should spin effortlessly.

Screws that are loose within the lock mechanism are another reason for a broken lock. They may loosen, fall out, or even break completely, preventing the lock from being able to perform as it should. The screws can be tightened by using a screwdriver, but be careful not to over tighten them. This could damage the internal components.

A faulty lock is dangerous for you and your family. This is particularly relevant if you have young children. It is possible for them to open the door without knowing, and this can allow them access to your home. If you're worried about this happening, then a vetted locksmith can provide rapid and effective service to secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing company in Lancing, who can repair all kinds of damaged and broken mechanisms handles, handles, cylinders, and lock systems on both upvc window repairs windows and doors. We can also modify the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.

Handles that are broken or damaged

As part of their overall security package, many double-glazed windows have a multipoint lock. This is a great choice for those who are concerned about burglars who are opportunistic and trying to gain entry to their home. Ask your locksmith about antilift blocks. These can be installed alongside your existing locks and can help keep your windows firmly shut.

Handle locks can be damaged or fail. They are the first thing criminals employ to open your window. The good news is, this is among the easiest parts to repair.

Modern uPVC handles and aluminum handles come with a multi-point locking mechanism, referred to as Espagnolette which is designed to resist forced entry. This upgrade to security is typically available as an extra on new uPVC window installation. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts and again as an additional feature on all new double-glazed window installations.

It is crucial to fix the handle as soon as you can if it's damaged. A damaged handle can stop the window from closing correctly and letting in a draft. It could be a weakness that burglars who are opportunistic could exploit, therefore putting your belongings and family at risk of theft.

To fix the malfunctioning mechanism, you first need to gain access to the window frame and then remove the damaged handle. The gearbox that opens the handle is then removed and the type of gear is identified so a replacement can be found that matches the profile of the internal window frame mechanism.

After the mechanism has been replaced the handle can then be re-affixed using the original screws however, we generally recommend replacing them with larger ones because this will ensure a more secure fit. The final step is to seal the handle with an opaque sealant. This will help protect it from further deterioration. Once that's done your window will be operational again and at only a fraction of the cost of replacing the entire window.

Broken or damaged hinges

If your windows aren't shut correctly, draughts may be able to enter, your home's security barriers will become weaker, and there is an increased chance of water damage or damp. Windows hinges that break or fail to function properly are a common problem and can be easily repaired.

If your uPVC windows won't close or open and close, it's likely the hinges need to be replaced or repaired. Many window companies will require you to buy an entirely new window unit in order to address this problem, window doctor near me but we can replace the hinges and save you money.

Window hinges can be damaged by repeated use, or weakening over time due to corrosion. If you find a damaged hinge, it's important to take steps to prevent further damage by taking care not to make the Window Doctor Near Me swing to close or open.

Knowing the type of hinge you have will help you identify the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to consult an expert in this regard to avoid the mistake of purchasing parts that are not compatible with your current hardware and window doctor near me cause further damage.

The hinges that are not working properly can be a huge problem for uPVC doors and windows. They can be an important source of noise and could also allow water to enter your windows.

To resolve this issue, first check that the pin barrel on both hinge halves is aligned. If it's not, tap the head pin with a hammer to make an arc in the hinge barrel. This will help to keep the pin in the right position. Then, ask a helper to hold the door as you remove the hinge screws and hinges from both the doorjamb and the door. Replace the hinges with those that are of the same size, and install the screws with glue. Finally, secure the hinges with clamps or weights until the glue dries.

After you have fixed your hinges, you can reinstall the door. You can also attach the handle. Replace the screws with wooden dowels of the same length as the original screw to ensure they are in line.

Broken or Faulty Glass

While uPVC windows do a great job of keeping cold out and the heat in, they are susceptible to becoming damaged over time. This could include cracked or damaged glass as well as defective locks. If neglected, this could be a costly problem. This can also detract from your home's aesthetics and result in a decrease in insulation. It is important to fix any damage as soon as it occurs.

If your glass is cracked but not shattered it is possible to fix it yourself using the appropriate tools and methods. Make sure that the area around the glass that has been broken is free of debris to ensure that pieces of glass do not cause injuries or cause a trip hazard. Then, you must remove any pieces of broken glass and dispose of them appropriately. Apply masking tape across the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. Pre-fitting the glass pane before applying glue is recommended in the case of windows with two panes. This will ensure that you have enough space to finish your project.

Before applying the glue, wipe the entire surface of the broken frame and the glass with a dry, clean cloth. Follow the instructions for application and curing time which may differ from product to product. You may have to clamp the cracked glass using clamps that are lightweight and designed to hold fragile materials, based on the angle.

When the adhesive has completely set, carefully place the glass inside the window frame, ensuring it's flush with the edge of the frame, and there are no gaps between the glass and the window sash. Be cautious not to flex the window when it's being put back in place, as this can weaken the seal and cause condensation and water infiltration.

If you have a glass window that is completely shattered or has larger cracks, contact an experienced professional glazier such as O'Brien(r) to organise the replacement. Leaving broken glass unattended can pose a safety risk for children and pets, so it's essential to act fast.