Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and window repairs timber, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into old frames very easily. However when you have double-pane windows that are anchored by internal beading, window repairs it will be more difficult to take out the existing panes and install new ones. In this case you'll need to locate some plastic spacers to help the new pane to fit properly into the window frame.

If you're planning to try to remove the window panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor and could be trampled under.

It's a great idea to tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional is able to repair the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is large, you may think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from worsening.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window repair near me and test it for fit. If you're happy with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it could also be caused by the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and do an experiment fitting. The corners of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

It is important to take action if awake each day to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it blows open with the breeze. These are easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical part hinges will wear out over time. It is essentially a very simple process but it can be simpler with someone else to assist in holding the frame up.

Make sure that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or by a poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be disaligned as a result of wear, which can cause a gap between the frame and sash. This can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to get them realigned or replaced. Second, the interlock can also become disaligned. This happens on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace these.

The next common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. Installing high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and they may reach an point at which it is more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it is always best to seek professional assistance immediately.