Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

It is crucial to wash and oil upvc window repairs near me windows and doors on a regular basis. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, you will need to source some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

If you're planning to attempt to remove the window panes yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent water and window repairs drafts from entering the property until a professional can come out and repair the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap between the window and the door is large, you might prefer security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, Window repairs draughts, and even security. It's important to take action immediately if you realize that your uPVC windows are sagging.

To fix a window repairs that is sagging you can try repositioning the hinges. To accomplish this, you'll need to open the window to get to the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the fitting. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. You'll first need to close the window and do an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on how severe the problem is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze It could be the hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical part hinges will be damaged over time. It's very simple to change a window hinge however it is simpler if you have someone to help hold the frame.

Verify that the uPVC hinges open and close in the proper direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or due to improper installation in the factory. This issue can be fixed by sending us a photo on our website. We will be more than happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges may also become unbalanced due to wear, causing a gap between the frame and sash. They can be fixed by giving them a thorough clean, however if they are beyond repair it might be necessary to get them realigned or replaced. The interlock may be misaligned. It is located on the hinge's side and could require to be cleaned. In some instances, it may be necessary to replace these.

The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be placed on the top of your windowsill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repair, your upvc windows will continue to provide excellent security and insulation for your home. It is crucial to recognise that all windows have a lifespan and there may come the point when it's more economical to replace them than repair them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as possible.