Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. However when you have double pane windows that are secured by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will prevent drafts and water from entering your property until a professional is able to repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is large, you might think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. Over time, they can be affected by a variety of issues such as sagging. A sagging uPVC window could cause issues with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll have to open the window to access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the size of the window, tighten the screws to secure them in the right position.

If you aren't able to move the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. It is essential to replace your seal as soon as you can to keep your uPVC window repair near me watertight and draughtproof.

UPVC handles can also become loose. The majority of the time this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and do a test fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, upvc window repairs you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. Most of the time, upvc window repair window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any DIY expert. Depending on how severe the issue is, the old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is related to the seal, not the frame. This can be easily repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it blows open with a breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It is very easy to change the hinges on a window but it's much easier if someone else helps hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a certain manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be pleased to offer you suggestions.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges, also due to wear and tear could become misaligned. This will cause a gap to form between the sash and the frame. If they are beyond repair, it might be necessary to have them realigned. The interlock may be misaligned. It is located on the hinge's side, and might require to be cleaned. In certain instances, it may be necessary to replace the hinges.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically fabric tubes which are filled with a type of filler. They can be put on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repair, your upvc windows will continue to provide a great level of insulation and security for your home. However, it is important to recognize that all windows have a life span and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as possible.